Description

This bracket will mount most major aftermarket digital displays that are popularly used in the Miata. Places the dash ahead of the factory gauge cluster just enough that you can retain the factory gauges if you wish.

Works on any NA or NB Miata that has a factory steering rack. Adjustable design allows you to fine tune fore/aft placement and angle.

Confirmed compatible with KMiata electric power steering rack kit.

If you have an NB chassis Miata (1999-2005), you will get a pair of spacers and longer bolts for install. The spacer should be placed between the dash bracket and the steering column, and the longer bolt supplied replaces the shorter factory bolt.

For the Racepak IQ3 and IQ3S, you will get a slotted mounting tab in addition to the main dash bracket. This tab is for the center/top mounting stud on the back of the IQ3/IQ3S.

Hardware for mounting the digital display to this bracket is NOT included as that will vary depending on the dash model you have.

———

Please NOTE: this bracket was designed, first and foremost, for race cars. Some trimming is required to fit street stuff:

• Trimming of the plastic dash cover is necessary to fit it around the bracket.
• Turn signal assembly and plastic steering column cover *may* be possible to fit with trimming, but we have not tried it.

———

Type S bracket with AIM MXP mounted:

Type S bracket with Racepak IQ3 mounted – note the tab used for mounting the top/center stud (comes with your bracket):

Type L bracket with Haltech iC-7 mounted:

AIM MXP mounted in an NA:

Bracket mounts using steering column bolts (pictured is KMiata Electric power steering column, which is a modified NB column):